BSMJ(parallel) SERIES SELF-HEALING LOW-VOLTAGE PARALLEL CAPACITORS

Check nameplate model matches purchased product before use.
Capacity test: Conduct as per 4.2, using instruments with <2% relative error.
Withstand voltage test: Apply 75% of the voltage specified in 4.3.

Install indoors, for use below 2000m altitude.
Ambient temperature -25~+50℃, humidity ＜85%; low-temperature version (-40~+50℃) available 
on request.
Installation site: avoid direct sunlight, rain, excessive dust and severe vibration; spacing ＞30mm; 
ensure good ventilation and heat dissipation in high summer temperatures.
Before installation, consider voltage rise after capacitor input to prevent long-term operation under 
overvoltage; check voltage waveform and network characteristics; take measures to limit harmonics 
if harmonic sources exist.
When paralleled with induction motor, capacitor current ＜90% of motor no-load current.
Use flexible copper wires for line and grounding terminals, ensure good contact; check terminals 
regularly to prevent damage.
Interval between disconnection and reconnection ＞3min (self-discharge time) to avoid overvoltage 
damage.

Users must provide product rated voltage, rated capacitance, number of phases, and other parameters.
Users should try their best to provide some characteristics of the place of use.

It is recommended to have a professional electrician perform the installation when there is a power outage, which can avoid electric shock caused by improper operation and product damage caused by improper wiring (product damage caused by incorrect wiring is not a quality issue and cannot be returned or compensated);

The product dimensions are measured using a vernier caliper and tape measure. Due to differences in tool sand manual measurement methods, there may be normal range errors in the results, which is a nomal phe.nomenon and not a problem with workmanship or quality.