-
Power Capacitors
- BY71 Series Cylindrical Capacitor
- BSMJ Series Self-healing Low Voltage Shunt Capacitors
- BY86 Series Controlled Intelligent Capacitor
- BYKXG/F Series Anti-harmonic Intelligent Capacitor
- BY81 Series Intelligent Capacitor
- BY82J Series Anti-harmonic Intelligent Capacitor
- BY89 Series Intelligent Capacitor
- Intelligent Controller Series
- Reactor
- Intelligent Switch Series
- Alternating Current Contactor
- Multifunctional power instruments
- Circuit Breaker
- APF/SVG/SPC Cabinet & Module Series
01
BY75 SERIES REACTIVE POWER COMPENSATION CONTROLLER
Product information
BY75
SERIES REACTIVE POWER COMPENSATION
CONTROLLER
Product details
The BY75-24 reactive power compensation controller is a new type of distribution measurement and control equipment that integrates funclions such as data collection, reactive power compensation, and power grid parameter analysis. lt is suitable for monitoring and reactive power compensation control of AC 0.4KV and 50Hz low-voltage distribution systems.
The BY75-24 reactive power compensation controller is based on a high-speed digital signal processor and adopts AC sampling. The human-machine interface is a 128X64 dot matrix large screen LCD display. it has power distribution monitoring, reactive power compensation, harmonic analysis, adaptive freqvency algorithm, and input signals that vary between 45Hz and 55Hz.
Air temperature
The air temperature shall not be higher than+65℃ and not lower than -25℃
The air temperature shall not be higher than+65℃ and not lower than -25℃
Atmospheric conditions
The air humidity should not exceed 90% at 20'c, and higher relative humidity is allowed at lower temperatures.
The air humidity should not exceed 90% at 20'c, and higher relative humidity is allowed at lower temperatures.
Altitude
not exceeding 2500 meters.
not exceeding 2500 meters.
Environmental conditions
The surrounding medium is free from fire and explosion hazards, corrosive gases, conductive dust, and rain and snow erosion. The installation site should not be subjected to severe vibration.
The surrounding medium is free from fire and explosion hazards, corrosive gases, conductive dust, and rain and snow erosion. The installation site should not be subjected to severe vibration.
Product details
MAIN TECHNICAL PARAMETERS
BASIC PARAMETERS
MEASUREMENT ACCURACY
CONTROL PARAMETERS
WIRING METHOD
After Sales
ABOUT INSTALLATION
It is recommended to have a professional electrician perform the installation when there is a power outage, which can avoid electric shock caused by improper operation and product damage caused by improper wiring (product damage caused by incorrect wiring is not a quality issue and cannot be returned or compensated);
REGARDING ORDERING
1. Before placing an order, please consult whether the product is suitable to avoid unnecessary trouble
2. Some models are unconventional and cannot be stocked. Please contact customer service to confirm the delivery time before placing an order
ABOUT DIMENSIONS
The product dimensions are measured using a vernier caliper and tape measure. Due to differences in tool sand manual measurement methods, there may be normal range errors in the results, which is a nomal phe.nomenon and not a problem with workmanship or quality.
DELIVERY
The warehouse will arrange the shipping route based on the size, quantity, and weight of the products. By
default, the shipment will be sent to the destination city via logistics and self pickup is required. If you need
to specify the logistics, please contact customer service for a note.
LOGISTICS AND PAYMENT METHODS
Accepted Delivery
Terms: FOB, CFR, CIF
EXW,FCA, DDP, DDU.
Express Delivery.
Accepted Payment - Currency: USD, EUR, JPY,CAD, AUD, HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T, L/C, Money Gram,Credit Card, PayPal, Western Union, Escrow;
