BY75 Series Reactive Power Compensation Controller Power Factor Controller Reactive Power Autocompensation Equipment for Efficient Power Distribution AC 250V

Application of BY75 Series Intelligent Reactive Power Compensation Controller

 Industrial manufacturing plants

Industrial manufacturing plants are energy-intensive facilities that run a wide variety of equipment. For example, motors are widely used in industrial production lines such as automotive, electronics, and textiles. Motors are inductive loads and consume a lot of reactive power. This can lead to a low power factor in the factory's electrical system. If the power factor is not improved, it will not only increase the factory's electricity costs, but may also cause voltage drops and affect the normal operation of other equipment.The BY75 series reactive power compensation controller plays an important role here. By accurately detecting the reactive power demand in the power system, it can effectively control the switching of capacitors. For example, when a high-power motor starts, it usually causes a significant increase in reactive power demand. The BY75 controller can quickly switch the appropriate capacitor to provide the necessary reactive power compensation. This helps maintain a high power factor (usually in the range of 0.95-0.99), thereby reducing reactive power losses in the power grid. According to industry data, this can reduce line losses by about 20%-30%, significantly saving energy costs for industrial plants.In addition, industrial equipment often generates harmonics. For example, frequency converters used in modern industrial manufacturing generate harmonic currents. These harmonics can cause transformers to overheat, interfere with communication systems, and even damage sensitive electrical equipment. The BY75 series controller is equipped with a harmonic detection function that can analyze the harmonic content in the electrical system and work in conjunction with other harmonic control equipment such as harmonic filters to mitigate the negative impact of harmonics and ensure stable and efficient operation of industrial manufacturing processes.

Commercial buildings

Commercial buildings, including shopping malls, office buildings, and hotels, are equipped with a large number of electrical appliances. Air conditioning systems, elevators, and lighting equipment are the main power consumers in these buildings. Air conditioning units, especially large central air conditioning systems, are inductive loads that contribute significantly to reactive power demand. In large shopping malls, the simultaneous operation of multiple air conditioning units can cause a significant drop in the power factor of the building's electrical system.The BY75 series reactive power compensation controller can be installed in the power distribution system of commercial buildings. It continuously monitors the voltage and current parameters in the system. When it detects that the power factor deviates from the set target value, the controller automatically adjusts the reactive power compensation. For example, during peak hours when the air conditioning load in a shopping mall is high, the controller can respond quickly and connect capacitors to improve the power factor. This not only reduces energy waste, but also helps improve the stability of the building's power supply. Unstable voltage can cause lights to flicker and elevators to operate abnormally, affecting customers' shopping experience or office building work efficiency.In addition, many modern commercial buildings are striving to achieve energy conservation and environmental protection goals. By using BY75 series controllers to optimize power factor and manage reactive power, buildings can reduce overall energy consumption. This is in line with the trend of sustainable development in the commercial real estate industry. For example, some commercial buildings that have obtained green certification use such controllers as part of their energy management strategy to meet energy efficiency rating requirements.

Power grid and substation

In power grids and substations, it is essential to maintain high-quality power supply. BY75 series reactive power compensation controller plays a vital role in ensuring stable operation of the power grid. Long-distance transmission lines in the power grid are prone to reactive power losses. The distributed capacitance and inductance of the line will cause a large amount of reactive power to be generated or consumed. If the compensation is not done properly, it may cause voltage fluctuations in the transmission line, especially at the receiving end of the power grid.The BY75 series controller can be installed at key nodes of the power grid, such as substations. It monitors power system parameters in real time, including voltage, current, active power, and reactive power. Based on the monitoring data, it can calculate the reactive power that needs to be compensated. For example, in a substation that supplies power to a large industrial area, if the reactive power demand of the industrial load is high, the BY75 controller can adjust the capacitor bank in the substation to provide the necessary reactive power. This helps keep the voltage within an acceptable range, usually within ±5% of the rated voltage, thereby ensuring the reliable operation of electrical equipment connected to the grid.Additionally, in grids with a high percentage of renewable energy, such as wind farms and solar plants, the intermittent and volatile nature of these energy sources can pose challenges to grid stability. The BY75 series controller can work in conjunction with other power quality management devices to address these challenges. It can help balance the reactive power generated by renewable energy inverters and the reactive power demand of the grid, thereby improving the overall power quality and stability of the grid when renewable energy penetration is high.

Storage Workshop

Production workshop

Workshop Vedio

 Baoyu Holding Co., Ltd

Baoyu Holding Co., Ltd. was founded in 2015 and is located in Wenzhou City, Zhejiang Province. The location is excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has advanced production equipment and skilled front-line employees. Our company is mainly engaged in the production and sales of power quality products，such as active power filters, static var generators, intelligent capacitors, power capacitors, reactive power compensators, composite switches, capacitor contactors, thyristor switches, reactors. Our company knows that the development of the company depends on the innovation and quality of the products. Therefore, our products have strict quality control from the procurement of raw materials to the sale of finished products. The company has established a quality management system that meets the requirements of the international quality management system. The company continuously releases the original innovations according to the market and customer needs, and always maintains the novelty and innovation of the products. The company wants the customer's thoughts and urgency. Solving problems for customers and meeting customer needs is our eternal pursuit! Our company's products are sold worldwide. The company has won the unanimous recognition of consumers with satisfactory product quality and perfect after-sales service. We have a professional R & D team. We can accept O E M and O D M.We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon. 

Our storage facility utilizes precision climate control, automated 3D warehousing (which increases capacity by 200%), and integrated safety systems (including fire suppression, anti-static protocols, and monthly audits) to maintain zero oxidation and ensure product integrity. In addition, our cleanroom manufacturing facility features a combination of natural and LED lighting, optimized workflows, and cross-trained technicians to enhance efficiency. Automated quality control systems and ISO-certified processes ensure compliance with dimensional and electrical standards, while AI-driven analytics and stringent protocols help achieve near-zero defects. By integrating advanced automation, tailored solutions, and steadfast reliability, Baoyu provides durable, mission-critical power systems, reinforcing our status as the preferred global partner for industries that require precision and innovation.

Business license

High-tech enterprise certificate

ISO management system certification

Corporate honors

Product certification certificate

Product testing report

Company patent certificate

Well-known domestic partners